What are the requirements for international air freight packaging?
International air freight packaging is not just about "looking good", but it must also ensure the safety of the goods during multiple loading and unloading processes, at cargo terminals, during cabin pressurization and temperature changes. Many damages are not caused by rough handling, but rather because the packaging was not designed for air freight from the very beginning.
Let's start with the general requirements. The outer box must be sturdy enough to withstand stacking pressure, and the box must not have any damages, moisture, or residual old labels. The weight and size of each item should be controlled within the operational range of the airline and the cargo terminal. Oversized items need to be palletized and clearly labeled. There should be no loose space in the packaging, and after filling, there should be no obvious displacement when shaken. The center of gravity of the goods should be centered to avoid uneven loading that leads to tipping. The labels should be attached to the flat surface of the outer box, with the shipping mark, tracking number, destination, and item number clearly readable. Old labels must be completely removed to avoid misreading during sorting.
For liquids, powders, and pastes, an inner layer of sealing and a middle layer of adsorption are required. The outer layer should use a sturdy cardboard box to prevent leakage and contamination of other goods on the same pallet. Magnetic items need to be shielded and marked with magnetic labels. Batteries in the cargo should be insulated and marked according to regulations. Precision instruments need to be protected against static electricity and moisture. In some cases, desiccant and humidity indicator cards should be added. All packaging must meet the requirements for visual inspection during airport security checks. Excessive shielding or wrapping with metal foil may trigger box opening inspections.
The packaging logic for fragile items is "layered force reduction". The first layer is single-piece protection, using bubble wrap, pearl cotton, or molded foam to independently wrap each item, with thicker edges, screens, and interfaces. The second layer is internal fixation, using foam blocks or honeycomb paper to support the items in the center of the box, leaving at least two to three centimeters of buffer space around the edges, and not allowing the items to directly contact the outer box. The third layer is the strength of the outer box, choosing a five-layer corrugated cardboard box, with an additional layer of hard cardboard on the bottom and top of the box. Heavy or high-value goods should be replaced with wooden boxes or non-sterilized wooden boxes. The fourth layer is external reinforcement, using cross-pleats of packing tape to bind, adding corner guards, and wrapping the entire box with an anti-humidity and anti-dispersal film.

Several practical details determine success or failure. A packing list should be placed inside the box, listing the item name, quantity, and item number, for easy inspection and claims. Multiple items should be numbered by item number and marked with a fraction such as "1/3" on the outer box. Fragile, upward-facing, and moisture-proof labels should be attached to the actual force-bearing surface, not just randomly. The specifications of the boxes for the same shipment should be as uniform as possible to reduce the risk of squeezing during re-boarding at the cargo terminal.
If the goods are of high value, it is recommended to take photos after packaging for archiving, documenting the state of the outer box, the internal buffering structure, and the sealing method. Once damaged, these images, along with the packing list and insurance policy, will become the most powerful evidence in the claim process. Packaging investment may seem like a cost, but for fragile items, it often determines the final profit or loss more than the freight.